Products

UNS N09706 Bars
Home > Products > Bars

We could produce UNS N09706 bars, UNS NO9706 bars,UNS N09706 round bars, UNS N09706 rods,UNS N09706 square bars,UNS N09706 flat bars,UNS N09706 hot rolled bars, UNS NO9706 cold drawn bright bars,UNS NO9706 forged bars, UNS N09706 forging bars,UNS N09706 Hexagon Bar,UNS N09706 rectangular bars from china.

We could produce UNS N09706 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N09706 is a nickel-chromium-iron precipitation-hardening alloy

The chemical composition of UNS N09706 bars is as follows

Elements

Content (%)

Nickel, Ni

39-44

Iron, Fe

38

Chromium, Cr

14.5-17.5

Niobium, Nb

2.50-3.30

Cobalt, Co

≤ 1

Titanium, Ti

≤ 0.40

Copper, Cu

≤ 0.35

Manganese, Mn

≤ 0.35

Silicon, Si

≤ 0.35

Carbon, C

≤ 0.30

Aluminum, Al

≤ 0.060

Phosphorous, P

≤ 0.020

Sulfur, S

≤ 0.015

Boron, B

≤ 0.0060


The mechanical property of UNS NO9706 bars is as follows

Properties

Metric

Imperial

Tensile strength

757 MPa

109800 psi

Yield strength (at strain 0.200%)

383 MPa

55500 psi

Poisson’s ratio (precipitation hardened, calculated by  mfr)

0.382

0.382

Modulus of elasticity (precipitation hardened, dynamic  method)

210 GPa

30500 ksi

Elongation at break

47%

47%


We could produce UNS N09706 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N09706 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N09706 bar

As per heat treatment of UNS N09706 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N09706 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO9706 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N09706 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N09706 bars are widely used in aircraft engine manufacturers, oil patch suppliers, petrochemical corporations and power-generation companies. Various military branches, aerospace engineers and nuclear markets and so on

In order to export our UNS NO9706 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N09706 bars UNS N09706 round bars, UNS NO9706 rods,that you need, we are glad to quote the best price for you

Except UNS N09706 bars,we also could produce UNS N09706 flanges,UNS N09706 plates,UNS N09706 fastener,UNS N09706 bolts,UNS N09706 fittings,UNS N09706 pipes,UNS N09706 tubes,UNS N09706 springs