Products

UNS N08811 Bars
Home > Products > Bars

We could produce UNS N08811 bars, UNS NO8811 bars,UNS N08811 round bars, UNS N08811 rods,UNS N08811 square bars,UNS N08811 flat bars,UNS N08811 hot rolled bars, UNS NO8811 cold drawn bright bars,UNS NO8811 forged bars, UNS N08811 forging bars,UNS N08811 Hexagon Bar,UNS N08811 rectangular bars from china.

We could produce UNS N08811 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N08811 are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

The chemical composition of UNS N08811 bars is as follows

(UNS N08811) Chemical Composition, %

Ni

Fe

Cr

Cu

Ti

Al

C

Mn

S

Si

30.0-35.0

39.5 min

19.0-23.0

.75 max

.25-.60

.85-1.20

.06-.10 max

1.5 max

.015 max

1.0 max


The mechanical property of UNS NO8811 bars is as follows

Alloy

Form

Condition

Ultimate
 Tensile
 Strength,
 ksi (MPa)

Yield
 Strength
 at 0.2%
 offset,
 ksi (MPa)

Elongation
 in 2"
 or 4D, percent

UNS N08811

SHT

80 (552)

35 (241)

47


We could produce UNS N08811 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N08811 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N08811 bar

As per heat treatment of UNS N08811 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N08811 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO8811 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N08811 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N08811 bars are widely used in Quarry & Opencast Mine Maintenance ,Mining & Excavation Plant Equipment ,Deep Mining Pit Maintenance & Repair ,Conveyor Equipment Manufacturers .Mine Construction & Site Extension Construction Impact, Jaw & Cone Crusher Manufacturers,Drilling, Scalping & Screener Equipment Manufacturers and so on

In order to export our UNS NO8811 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N08811 bars UNS N08811 round bars, UNS NO8811 rods,that you need, we are glad to quote the best price for you

Except UNS N08811 bars,we also could produce UNS N08811 flanges,UNS N08811 plates,UNS N08811 fastener,UNS N08811 bolts,UNS N08811 fittings,UNS N08811 pipes,UNS N08811 tubes,UNS N08811 springs