Products

UNS N08810 Bars
Home > Products > Bars

We could produce UNS N08810 bars, UNS NO8810 bars,UNS N08810 round bars, UNS N08810 rods,UNS N08810 square bars,UNS N08810 flat bars,UNS N08810 hot rolled bars, UNS NO8810 cold drawn bright bars,UNS NO8810 forged bars, UNS N08810 forging bars,UNS N08810 Hexagon Bar,UNS N08810 rectangular bars from china.

We could produce UNS N08810 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N08810 are nickel-iron-chromium alloys with good strength and excellent resistance to oxidation and carburization in high-temperature exposure.

The chemical composition of UNS N08810 bars is as follows

(UNS N08810) Chemical Composition, %

Ni

Fe

Cr

Cu

Ti

Al

C

Mn

S

Si

30.0-35.0

39.5 min

19.0-23.0

.75 max

.15-.60

.15-.60

.05-.10 max

1.5 max

.015 max

1.0 max


The mechanical property of UNS NO8810 bars is as follows

Alloy

Form

Condition

Ultimate
 Tensile
 Strength,
 ksi (MPa)

Yield
 Strength
 at 0.2%
 offset,
 ksi (MPa)

Elongation
 in 2"
 or 4D, percent

UNS N08810

SHT

65 (450)*

25 (170)*

30*


We could produce UNS N08810 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N08810 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N08810 bar

As per heat treatment of UNS N08810 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N08810 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO8810 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N08810 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N08810 bars are widely used in Ship building,Refineries,Defence.Oil & gas.Mining,Petrochemical,Chemical,Power plant,Railway,Sugar,Steel plant,Fertilizers,Ports,Paper,Cement and so on

In order to export our UNS NO8810 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N08810 bars UNS N08810 round bars, UNS NO8810 rods,that you need, we are glad to quote the best price for you

Except UNS N08810 bars,we also could produce UNS N08810 flanges,UNS N08810 plates,UNS N08810 fastener,UNS N08810 bolts,UNS N08810 fittings,UNS N08810 pipes,UNS N08810 tubes,UNS N08810 springs