Products

UNS N08367 Bars
Home > Products > Bars

We could produce UNS N08367 bars, UNS NO8367 bars,UNS N08367 round bars, UNS N08367 rods,UNS N08367 square bars,UNS N08367 flat bars,UNS N08367 hot rolled bars, UNS NO8367 cold drawn bright bars,UNS NO8367 forged bars, UNS N08367 forging bars,UNS N08367 Hexagon Bar,UNS N08367 rectangular bars from china.

We could produce UNS N08367 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N08367 is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking

The chemical composition of UNS N08367 bars is as follows

Ni

Cr

Mo

C

N

Mn

23.5-25.5

20.00-22.00

6.00-7.00

0.03 Max

0.18-0.25

2.0 Max

Si

P

S

Cu

Fe

1.00 Max

.040 Max

0.03 Max

0.75 Max

Remainder


The mechanical property of UNS NO8367 bars is as follows

Mechanical Properties
Representative Tensile and Impact Properties

Temp. °F (°C)

Ult. Tensile Strength, psi

.2% Yield Strength, psi

Elongation in 2”, percent

Charpy V-Notch Toughness, ft-lb

70 (21)

108,000

53,000

47

140


We could produce UNS N08367 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N08367 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N08367 bar

As per heat treatment of UNS N08367 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N08367 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO8367 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N08367 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N08367 bars are widely used in chemical pump,plunger pumps,Cement Mill ,sugar Mill,concrete mills and mixers,processing units,mechanical equipment, crystalizer equipment,Wellhead and Christmas tree,power transmission, turbine,gas compressor,gear boxes and so on.

In order to export our UNS NO8367 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N08367 bars UNS N08367 round bars, UNS NO8367 rods,that you need, we are glad to quote the best price for you

Except UNS N08367 bars,we also could produce UNS N08367 flanges,UNS N08367 plates,UNS N08367 fastener,UNS N08367 bolts,UNS N08367 fittings,UNS N08367 pipes,UNS N08367 tubes,UNS N08367 springs