Products

UNS N08330 Bars
Home > Products > Bars

We could produce UNS N08330 bars, UNS NO8330 bars,UNS N08330 round bars, UNS N08330 rods,UNS N08330 square bars,UNS N08330 flat bars,UNS N08330 hot rolled bars, UNS NO8330 cold drawn bright bars,UNS NO8330 forged bars, UNS N08330 forging bars,UNS N08330 Hexagon Bar,UNS N08330 rectangular bars from china.

We could produce UNS N08330 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N08330 is an austenitic alloy with good high-temperature strength and corrosion resistance

The chemical composition of UNS N08330 bars is as follows

Limiting Chemical Composition, %

Nickel..........................................................................34.0-37.0

Chromium....................................................................17.0-20.0

Iron...............................................................................Balance*

Carbon........................................................................0.08max.

Silicon..........................................................................0.75-1.50

Manganese...................................................................2.0 max.

Phosphorus..............................................................0.030 max.

Sulfur........................................................................0.030max.


The mechanical property of UNS NO8330 bars is as follows

Properties

Metric

Imperial

Tensile  strength(annealed)

600 MPa

87 ksi

Yield  strength(annealed)

280 MPa

40.6 ksi

Elongation  at Break

45%

45%


We could produce UNS N08330 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N08330 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N08330 bar

As per heat treatment of UNS N08330 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N08330 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO8330 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N08330 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N08330 bars are widely used in mechanical engineering, in harbour cranes, ship deck cranes, truck cranes and construction cranes as well as in excavators, antenna systems, in aviation and aerospace, in the offshore technology, rail vehicles, telescopes, tunnelling machines, wind energy turbines, underwater turbines and solar energy plants and so on

In order to export our UNS NO8330 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N08330 bars UNS N08330 round bars, UNS NO8330 rods,that you need, we are glad to quote the best price for you

Except UNS N08330 bars,we also could produce UNS N08330 flanges,UNS N08330 plates,UNS N08330 fastener,UNS N08330 bolts,UNS N08330 fittings,UNS N08330 pipes,UNS N08330 tubes,UNS N08330 springs