Products

UNS N07713 Bars
Home > Products > Bars

We could produce UNS N07713 bars, UNS NO7713 bars,UNS N07713 round bars, UNS N07713 rods,UNS N07713 square bars,UNS N07713 flat bars,UNS N07713 hot rolled bars, UNS NO7713 cold drawn bright bars,UNS NO7713 forged bars, UNS N07713 forging bars,UNS N07713 Hexagon Bar,UNS N07713 rectangular bars from china.

We could produce UNS N07713 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N07713 offers outstanding resistance to thermal fatigue and good castability while offering exceptional rupture strength at 1700°F (927°C).

The chemical composition of UNS N07713 bars is as follows

Chemical Compositionof Inconel 713C

·        Carbon 0.20

·        Manganese 1.0 max

·        Sulfur 0.015 max

·        Silicon 1.0 max

·        Chromium 11.0-14.0

·        Molybdenum 3.5-5.5

·        Titanium 0.25-1.25

·        Aluminum 5.5-6.5

·        Iron 5.0 max

·        Columbium + Ta 1.0-3.0

·        Nickel remainder


The mechanical property of UNS NO7713 bars is as follows

Mechanical Properties
Annealed Material

Form

Tensile Min.

Yield Min. (.2% offset)

Elongation Min.

Reduction of Area Min.

Bar (hot or cold finished)

123000 Psi

106000 psi

7.9%

11.6%


We could produce UNS N07713 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N07713 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N07713 bar

As per heat treatment of UNS N07713 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N07713 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO7713 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N07713 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N07713 bars are widely used in Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on

In order to export our UNS NO7713 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N07713 bars UNS N07713 round bars, UNS NO7713 rods,that you need, we are glad to quote the best price for you

Except UNS N07713 bars,we also could produce UNS N07713 flanges,UNS N07713 plates,UNS N07713 fastener,UNS N07713 bolts,UNS N07713 fittings,UNS N07713 pipes,UNS N07713 tubes,UNS N07713 springs