UNS N06950 Bars
Home > Products > Bars

We could produce UNS N06950 bars, UNS NO6950 bars,UNS N06950 round bars, UNS N06950 rods,UNS N06950 square bars,UNS N06950 flat bars,UNS N06950 hot rolled bars, UNS NO6950 cold drawn bright bars,UNS NO6950 forged bars, UNS N06950 forging bars,UNS N06950 Hexagon Bar,UNS N06950 rectangular bars from china.

We could produce UNS N06950 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N06950 is an alloy of nickel-chromium-molybdenum and iron is specifically intended to resist corrosion by "sour gas" (hydrogen-sulfide) in oil well applications.

The chemical composition of UNS N06950 bars is as follows


0.4 max


0.02 max


19 - 21


2.5 min


0.5 max


15 - 20


1 max


8 - 10




0.5 max


0.04 max


1 max


0.015 max


1 max

The mechanical property of UNS NO6950 bars is as follows




Tensile strength

≥ 760 MPa

≥ 110000 psi

Yield strength (@ strain 0.200%)

700-860 MPa

102000-125000 psi

Elongation at break (in 50 mm)

≥ 20%

≥ 20%

Hardness, Brinell (estimated from Rockwell C for  Brinell 10 mm ball/3000 kg load)



Hardness, Knoop (estimated from Rockwell C)



Hardness, Rockwell A (estimated from Rockwell C)



Hardness, Rockwell C

≤ 31

≤ 31

Hardness, Vickers (estimated from Rockwell C)



We could produce UNS N06950 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N06950 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N06950 bar

As per heat treatment of UNS N06950 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N06950 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO6950 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N06950 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N06950 bars are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

In order to export our UNS NO6950 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N06950 bars UNS N06950 round bars, UNS NO6950 rods,that you need, we are glad to quote the best price for you

Except UNS N06950 bars,we also could produce UNS N06950 flanges,UNS N06950 plates,UNS N06950 fastener,UNS N06950 bolts,UNS N06950 fittings,UNS N06950 pipes,UNS N06950 tubes,UNS N06950 springs