Products

UNS N06626 Bars
Home > Products > Bars

We could produce UNS N06626 bars, UNS NO6626 bars,UNS N06626 round bars, UNS N06626 rods,UNS N06626 square bars,UNS N06626 flat bars,UNS N06626 hot rolled bars, UNS NO6626 cold drawn bright bars,UNS NO6626 forged bars, UNS N06626 forging bars,UNS N06626 Hexagon Bar,UNS N06626 rectangular bars from china.

We could produce UNS N06626 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N06626 was developed as a fatigue-resistant, bellows-quality: version of INCONEL alloy 625

The chemical composition of UNS N06626 bars is as follows

Nickel..........................................................................58.0min.

Chromium..................................................................20.0-23.0

Molybdenum................................................................8.0-10.0

Niobiuma....................................................................3.15-4.15

Iron...............................................................................5.0max.

Carbon.......................................................................0.03max.

Manganese................................................................0.50max.

Silicon........................................................................0.15max.

Sulfur........................................................................0.015max.

Aluminum...................................................................0.40max.

Titanium ....................................................................0.40max.

Phosphorus.............................................................0.015max.

Cobalt.........................................................................1.0max.

Nitrogen..................................................................0.02 max.


The mechanical property of UNS NO6626 bars is as follows

the mechanicalproperties of annealed UNS N06626™ are provided below.

Properties

Metric

Imperial

Tensile strength

769.5 MPa

111600 psi

Yield strength (at strain 0.200%)

319 MPa

46300 psi

Elastic modulus

208 GPa

30200 ksi

Shear modulus

81.4 GPa

11800 ksi

Poisson’s ratio

0.28

0.28

Elongation at break

63%

63%

Hardness, Rockwell B

84

84


We could produce UNS N06626 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N06626 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N06626 bar

As per heat treatment of UNS N06626 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N06626 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO6626 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N06626 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N06626 bars are widely used in chemical pump,plunger pumps,Cement Mill ,sugar Mill,concrete mills and mixers,processing units,mechanical equipment, crystalizer equipment,Wellhead and Christmas tree,power transmission, turbine,gas compressor,gear boxes and so on.

In order to export our UNS NO6626 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N06626 bars UNS N06626 round bars, UNS NO6626 rods,that you need, we are glad to quote the best price for you

Except UNS N06626 bars,we also could produce UNS N06626 flanges,UNS N06626 plates,UNS N06626 fastener,UNS N06626 bolts,UNS N06626 fittings,UNS N06626 pipes,UNS N06626 tubes,UNS N06626 springs