Products

UNS N06075 Bars
Home > Products > Bars

We could produce UNS N06075 bars, UNS NO6075 bars,UNS N06075 round bars, UNS N06075 rods,UNS N06075 square bars,UNS N06075 flat bars,UNS N06075 hot rolled bars, UNS NO6075 cold drawn bright bars,UNS NO6075 forged bars, UNS N06075 forging bars,UNS N06075 Hexagon Bar,UNS N06075 rectangular bars from china.

We could produce UNS N06075 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N06075  is a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon.

The chemical composition of UNS N06075 bars is as follows

Ni......Remainder

Cr.....18.0 - 21.0

Ti.......0.2 - 0.6

C.......0.08 - 0.15

Si.......max. 1.00

Cu......max. 0.50

Fe......max. 5.0

Mn.....max. 1.0


The mechanical property of UNS NO6075 bars is as follows

Material

Test Temp °F

Ultimate Tensile Strength (ksi)

0.2 % Yield Strength (ksi)

Elongation in 2"

UNS N06075

Room

114.4

59.4

31


We could produce UNS N06075 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N06075 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N06075 bar

As per heat treatment of UNS N06075 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N06075 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO6075 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N06075 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N06075 bars are widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on

In order to export our UNS NO6075 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N06075 bars UNS N06075 round bars, UNS NO6075 rods,that you need, we are glad to quote the best price for you

Except UNS N06075 bars,we also could produce UNS N06075 flanges,UNS N06075 plates,UNS N06075 fastener,UNS N06075 bolts,UNS N06075 fittings,UNS N06075 pipes,UNS N06075 tubes,UNS N06075 springs