Products

UNS N02270 Bars
Home > Products > Bars

We could produce UNS N02270 bars, UNS NO2270 bars,UNS N02270 round bars, UNS N02270 rods,UNS N02270 square bars,UNS N02270 flat bars,UNS N02270 hot rolled bars, UNS NO2270 cold drawn bright bars,UNS NO2270 forged bars, UNS N02270 forging bars,UNS N02270 Hexagon Bar,UNS N02270 rectangular bars from china.

We could produce UNS N02270 bars with diamter from from 5MM to 1000MM and length up to 15 metres

UNS N02270 is A high-purity grade of nickel made by powder metallurgy.

The chemical composition of UNS N02270 bars is as follows

Element

Content (%)

Nickel, Ni

≥99.9

Iron, Fe

≤0.050

Carbon, C

≤0.020

Copper, Cu

≤0.010

Titanium, Ti

≤0.0050

Silicon, Si

≤0.0050

Magnesium, Mg

≤0.0050

Manganese, Mn

≤0.0030

Sulfur, S

≤0.0030


The mechanical property of UNS NO2270 bars is as follows

CONDITION

APPROX   TENSILE STRENGTH

APPROX   SERVICE TEMPERATURE

Annealed

300 - 450 N/mm2

44 - 65 ksi

Tensile strength and elongation drop  significantly at temperatures above
 315°C (600°F). Service temperature is dependent on environment, load and size  range.

Hard Drawn

600 - 800 N/mm2

87 - 116 ksi


We could produce UNS N02270 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of UNS N02270 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of UNS N02270 bar

As per heat treatment of UNS N02270 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply UNS N02270 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of UNS NO2270 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of UNS N02270 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our UNS N02270 bars are widely used in ANCILLARY INDUSTRIES,Alternative Fuel Systems,Research & Design Projects,Geothermal Power Plants,Wind Farm Maintenance ,Solar (Photovoltaics) Power Equipment ,Hydro-Electric Power Plant,Coal-fueled, Oil-fueled or Nuclear Power Plant Maintenance ,Natural Gas Storage & Plant Maintenance Boiler Systems ,Turbine Manufacturers ,Transmission, Distribution & Storage Equipment Manufacturers,Motors & Generators and so on

In order to export our UNS NO2270 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of UNS N02270 bars UNS N02270 round bars, UNS NO2270 rods,that you need, we are glad to quote the best price for you

Except UNS N02270 bars,we also could produce UNS N02270 flanges,UNS N02270 plates,UNS N02270 fastener,UNS N02270 bolts,UNS N02270 fittings,UNS N02270 pipes,UNS N02270 tubes,UNS N02270 springs