Products

Ph13-8Mo Bars
Home > Products > Bars

We could produce Ph13-8Mo bars, Ph 13-8 Mo bars,Ph13-8Mo round bars, Ph13-8Mo rods,Ph13-8Mo square bars,Ph13-8Mo flat bars,Ph13-8Mo hot rolled bars, Ph 13-8 Mo cold drawn bright bars,Ph 13-8 Mo forged bars, Ph13-8Mo forging bars,Nimonic 90 Hexagon Bar,Ph13-8Mo rectangular bars from china.
The diameter of Ph13-8Mo bars that we could do ranges from 6MM to 800MM. The length of Ph13-8Mo bars that we could do is up to 15 metres
Ph13-8Mo is a precipitation hardenable stainless. It is a medium to high strength material achieved through appropriate ageing treatments (see table below) and contains very good resistance to stress corrosion.

The chemical composition of Ph13-8Mo bars is as follows

Chemical Composition (Wt %)



C

Si

Mn

P

S

Cr

Mo

Ni

Al

N

Fe

Min

-

-

-

-

-

12.24

2.00

7.50

0.90

-

Bal

Max

0.05

0.10

0.10

0.01

0.008

13.25

2.50

8.50

1.35

0.010

-


The mechanical property of Ph 13-8 Mo bars is as follows

Typical Mechanical Properties



0.2% proof Stress

Tensile Strength

Elongation

Reduction of area

Hardnesss


MPA

MPA

%

%

HRC


Min

Min

Min

Min

Min





L

T


H950

1413

1517

10

45

35

45

H1000

1310

1413

10

60

40

43

H1025

1207

1276

11

50

45

41

H1050

1138

1207

12

50

45

40

H1100

931

1034

14

50

50

34

H1150

621

931

14

50

50

30


We could produce Ph13-8Mo bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for Ph13-8Mo bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of Ph13-8Mo bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our Ph 13-8 Mo bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our Ph13-8Mo bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply Ph13-8Mo round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of Ph 13-8 Mo bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of Ph13-8Mo bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our Ph13-8Mo bars are widely used in Boilers,Bridges,Construction Machinery,Engineered Plumbing,Engines,Hydraulics,Impellers,Jewelry,Machine Tools,Water Treatment Plants and so on

Please tell us the size and quantity of Ph13-8Mo bars Ph13-8Mo round bars, Ph 13-8 Mo rods,that you need, we are glad to quote the best price for you
Except Ph13-8Mo bars,we also could produce Ph13-8Mo flanges,Ph13-8Mo plates,Ph13-8Mo fasteners,Ph13-8Mo bolts,Ph13-8Mo pipe fittings,Ph13-8Mo pipes,Ph13-8Mo tubes,Ph13-8Mo springs