Products

Nitronic 60 Bars
Home > Products > Bars

We could produce Nitronic 60 bars, Nitronic60 bars,Nitronic 60 round bars, Nitronic 60 rods,Nitronic 60 square bars,Nitronic 60 flat bars,Nitronic 60 hot rolled bars, Nitronic60 cold drawn bright bars,Nitronic60 forged bars, Nitronic 60 forging bars,Nimonic 90 Hexagon Bar,Nitronic 60 rectangular bars from china.
The diameter of Nitronic 60 bars that we could do ranges from 6MM to 800MM. The length of Nitronic 60 bars that we could do is up to 15 metres
Nitronic 60 provides a significantly lower cost way to fight wear and galling compared with cobalt-bearing and high nickel alloys

The chemical composition of Nitronic 60 bars is as follows

Chemistry

Ni

Cr

Mn

Si

C

N

S

P

Fe

MIN

8.0

16.0

7.0

3.5

-

0.08

-

-

-

MAX

9.0

18.0

9.0

4.5

0.10

0.18

0.03

0.06

Balance


The mechanical property of Nitronic60 bars is as follows

Minimum Specified Properties,

Ultimate Tensile Strength, ksi

95

0.2% Yield Strength, ksi

50

Elongation, %

35

Reduction of Area, %

55

Hardness MAX, Brinell

241


We could produce Nitronic 60 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for Nitronic 60 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of Nitronic 60 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our Nitronic60 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our Nitronic 60 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply Nitronic 60 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of Nitronic60 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of Nitronic 60 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our Nitronic 60 bars are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

Please tell us the size and quantity of Nitronic 60 bars Nitronic 60 round bars, Nitronic60 rods,that you need, we are glad to quote the best price for you
Except Nitronic 60 bars,we also could produce Nitronic 60 flanges,Nitronic 60 plates,Nitronic 60 fasteners,Nitronic 60 bolts,Nitronic 60 pipe fittings,Nitronic 60 pipes,Nitronic 60 tubes,Nitronic 60 springs