Products

Nitronic 50 Bars
Home > Products > Bars

We could produce Nitronic 50 bars, Nitronic50 bars,Nitronic 50 round bars, Nitronic 50 rods,Nitronic 50 square bars,Nitronic 50 flat bars,Nitronic 50 hot rolled bars, Nitronic50 cold drawn bright bars,Nitronic50 forged bars, Nitronic 50 forging bars,Nimonic 90 Hexagon Bar,Nitronic 50 rectangular bars from china.
The diameter of Nitronic 50 bars that we could do ranges from 6MM to 800MM. The length of Nitronic 50 bars that we could do is up to 15 metres
Nitronic 50 is a chromium-nickel-manganese-molybdenum austenitic stainless steel that remains completely nonmagnetic after severe cold working or exposure to low temperatures.

The chemical composition of Nitronic 50 bars is as follows

Chemistry

Ni

Cr

Mo

Mn

Si

C

N

S

P

Cb

V

Fe

MIN

11.5

20.5

1.5

4.0

-

-

0.2

-

-

0.1

0.1

-

MAX

13.5

23.5

3.0

6.0

1.0

0.06

0.4

0.03

0.045

0.3

0.3

Balance


The mechanical property of Nitronic50 bars is as follows

Mechanical Properties

Minimum Specified Properties

Ultimate Tensile Strength, ksi

100

0.2% Yield Strength, ksi

55

Elongation, %

35

Reduction of Area, %

55


We could produce Nitronic 50 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for Nitronic 50 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of Nitronic 50 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our Nitronic50 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our Nitronic 50 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply Nitronic 50 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of Nitronic50 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of Nitronic 50 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our Nitronic 50 bars are widely used in Drilling & Boring Equipment ,Wellhead Manufacture,Repair or Servicing Companies,Pipeline Construction & Repair.Pumping & Refining Equipment,Oil Extraction Systems,Oil Rig Construction,Repair & Maintenance Subcontractors ,Upstream, Midstream or Downstream Service Providers .Isolation Valves & Choke Equipment Manufacturers,Submersible Watercraft and so on

Please tell us the size and quantity of Nitronic 50 bars Nitronic 50 round bars, Nitronic50 rods,that you need, we are glad to quote the best price for you
Except Nitronic 50 bars,we also could produce Nitronic 50 flanges,Nitronic 50 plates,Nitronic 50 fasteners,Nitronic 50 bolts,Nitronic 50 pipe fittings,Nitronic 50 pipes,Nitronic 50 tubes,Nitronic 50 springs