We could produce Nimonic 75 bars, Nimonic75 bars,Nimonic 75 round bars, Nimonic 75 rods,Nimonic 75 square bars,Nimonic 75 flat bars,Nimonic 75 hot rolled bars, Nimonic75 cold drawn bright bars,Nimonic75 forged bars, Nimonic 75 forging bars,Nimonic 75 Hexagon Bar,Nimonic 75 rectangular bars from china.

The diameter of Nimonic 75 bars that we could do ranges from 6MM to 800MM. The length of Nimonic 75 bars that we could do is up to 15 metres

Nimonic 75 is  a 80/20 nickel-chromium alloy with controlled additions of titanium and carbon.

The chemical composition of Nimonic 75 bars is as follows

Ni......Remainder

Cr.....18.0- 21.0

Ti.......0.2- 0.6

C.......0.08- 0.15

Si.......max.1.00

Cu......max.0.50

Fe......max.5.0

Mn.....max. 1.0

The mechanical property of Nimonic75 bars is as follows

Material	Test Temp °F	Ultimate Tensile Strength (ksi)	0.2 % Yield Strength (ksi)	Elongation in 2"
Nimonic 75	Room	114.4	59.4	31

We could produce Nimonic 75 bars as per the standard of ASTM B462 and ASTM B473

As per melting methods for Nimonic 75 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Nimonic 75 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Nimonic75 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.

Our Nimonic 75 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Nimonic 75 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Nimonic75 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Nimonic 75 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Nimonic 75 bars are widely used in Ball Valves,Check Valves,Air filter,Oil filter,Heat Exchangers, Pressure Vessels,Rotary screw compressors,Cyclone Separators, Water tube boilers,In-line pumps,Magnetic pumps,Batch Steam Sterilizer,Naval Construction and so on

Please tell us the size and quantity of Nimonic 75 bars Nimonic 75 round bars, Nimonic75 rods,that you need, we are glad to quote the best price for you

Except Nimonic 75 bars,we also could produce Nimonic 75 flanges,Nimonic 75 plates,Nimonic 75 fastener,Nimonic 75 bolts,Nimonic 75 pipe fittings,Nimonic 75 pipes,Nimonic 75 tubes,Nimonic 75 springs