We could produce Nimonic 115 bars, Nimonic115 bars,Nimonic 115 round bars, Nimonic 115 rods,Nimonic 115 square bars,Nimonic 115 flat bars,Nimonic 115 hot rolled bars, Nimonic115 cold drawn bright bars,Nimonic115 forged bars, Nimonic 115 forging bars,Nimonic 115 Hexagon Bar,Nimonic 115 rectangular bars from china.

The diameter of Nimonic 115 bars that we could do ranges from 6MM to 800MM. The length of Nimonic 115 bars that we could do is up to 15 metres

Nimonic 115 is a nickel chromium-cobalt based alloy, strengthened with additions of molybdenum, aluminum and titanium.

The chemical composition of Nimonic 115 bars is as follows

Table 1 - Nominal Composition, %

C..........................................................................0.12-0.2

Si............................................................................1.0max

Cu...........................................................................0.2max

Fe................................................................................1.0max

Mn....................................................................1.0 max

Cr....................................................................14.0-16.0

Ti...........................................................................3.5-4.5

Al........................................................................4.5-5.5

Co..........................................................................13.0-15.5

Mo...................................................................3.0-5.0

B.........................................................................0.01-0.025

Zi.....................................................................0.15max

Pb.........................................................................0.0015max

Sr.........................................................................0.015max

Ni...........................................................................Balance

The mechanical property of Nimonic115 bars is as follows

Key properties (in annealedcondition)

·            Tensile strength: 185.00–0.00 Ksi

·            Yield strength: 141.00–0.00 Ksi

·            Elongation: 38.00–0.00%

We could produce Nimonic 115 bars as per the standard of ASTM B462 and ASTM B473

As per melting methods for Nimonic 115 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Nimonic 115 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Nimonic115 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.

Our Nimonic 115 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Nimonic 115 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Nimonic115 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Nimonic 115 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Nimonic 115 bars are widely used in Chemical, Dyestuff, Paints, Sugar, Food, Pharmaceuticals, Environment Protection and various other process industries,Ship Maintenance, Refurbishment & Repair Companies,Midget Submarine & Wet Sub Construction and so on

Please tell us the size and quantity of Nimonic 115 bars Nimonic 115 round bars, Nimonic115 rods,that you need, we are glad to quote the best price for you

Except Nimonic 115 bars,we also could produce Nimonic 115 flanges,Nimonic 115 plates,Nimonic 115 fastener,Nimonic 115 bolts,Nimonic 115 pipe fittings,Nimonic 115 pipes,Nimonic 115 tubes,Nimonic 115 springs