We could produce Monel 400 bars, Monel400 bars,Monel 400 round bars, Monel 400 rods,Monel 400 square bars,Monel 400 flat bars,Monel 400 hot rolled bars, Monel 400 cold drawn bright bars,Monel 400 forged bars, Monel 400 forging bars,Monel 400 Hexagon Bar,Monel 400 rectangular bars from china.

The diameter of Monel 400 bars that we could do ranges from 6MM to 800MM. The length of Monel 400 bars that we could do is up to 15 metres

Monel 400 is  a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.

The chemical composition of Monel 400 bars is as follows

Carbon		0.3 max
Copper		28 - 34
Iron		2.5 max
Manganese		2 max
Nickel		Balance
Silicon		0.5 max
Sulphur		0.024 max

The mechanical property of Monel 400 bars is as follows

Standard	Rm	Rp  0.2%	A %	Z	HB	Hrc	Comments
ASTM B164 - 93	580	345	10	-	-	-	Cold worked rounds, up to 12.7 mm.
ASTM B164 - 93	600	415	20	-	-	-	Cold worked rounds, from 12.7 to 88.9 mm, incl.
ASTM B164 - 93	580	380	20	-	-	-	Cold worked rounds, from 88.9 to 101.6 mm incl.
ASTM B164 - 93	552	276	30	-	-	-	Hot rolled rounds, up to 305 mm
ASTM B164 - 93	480	170	35	-	-	-	Hot or cold rolled and annealed rounds
ASTM B564 - 97a	483	172	35	-	-	-	Forged and annealed metal

We could produce Monel 400 bars as per the standard of ASTM B164 and ASTM B564

As per melting methods for Monel 400 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Monel 400 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Monel 400 bars could be  100% ultrasonic test according to EN10228-3, SA388,,ASTM A531-1974, Sep 1921 C/c etc.

Our Monel 400 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Monel 400 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Monel 400 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Monel 400 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Monel 400 bars are widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on

Please tell us the size and quantity of Monel 400 bars Monel 400 round bars, Monel 400 rods,that you need, we are glad to quote the best price for you

Except Monel 400 bars,we also could produce Monel 400 flanges,Monel 400 plates,Monel 400 fastener,Monel 400 bolts,Monel 400 pipe fittings,Monel 400 pipes,Monel 400 tubes,Monel 400 springs