Products

Maraging C-350 Bars
Home > Products > Bars

We could produce Maraging C-350 bars, Maraging C350 bars,Maraging C-350 round bars, Maraging C-350 rods,Maraging C-350 square bars,Maraging C-350 flat bars,Maraging C-350 hot rolled bars, Maraging C350 cold drawn bright bars,Maraging C350 forged bars, Maraging C-350 forging bars,Maraging C-350 Hexagon Bar,Maraging C-350 rectangular bars from china.

The diameter of Maraging C-350 bars that we could do ranges from 6MM to 800MM. The length of Maraging C-350 bars that we could do is up to 15 metres

Maraging C-350  is also called Vascomax 350 and is an 18% nickel, cobalt strengthened steel.

The chemical composition of Maraging C-350 bars is as follows

C

MN

P

S

Si

Cr

Ni

Mo

Cu

Co

Cb

Ti

Al

Fe

B

Zr

.03 max

.10 max

.01 max

.01 max

.10 max

18.50

4.80

9.00  

1.40

.10

.003

.01


The mechanical property of Maraging C350 bars is as follows

0.2% Proof Stress

Tensile Strength

Elongation

Reduction of Area

Hardness

2242 MPA Min.

2310 MPA Min.

6 % Min.

25 % Min.

53 HRC


We could produce Maraging C-350 bars as per the standard of ASTM B462 and ASTM B473

As per melting methods for Maraging C-350 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Maraging C-350 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Maraging C350 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.

Our Maraging C-350 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Maraging C-350 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Maraging C350 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Maraging C-350 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Maraging C-350 bars are widely used in bearing industry, power-generation including steam and gas-turbine, wind energy, mining and construction equipment, oil & gas, petrochemical, defense, rail transportation, and a wide variety of general industrial applications and so on

Please tell us the size and quantity of Maraging C-350 bars Maraging C-350 round bars, Maraging C350 rods,that you need, we are glad to quote the best price for you

Except Maraging C-350 bars,we also could produce Maraging C-350 flanges,Maraging C-350 plates,Maraging C-350 fastener,Maraging C-350 bolts,Maraging C-350 pipe fittings,Maraging C-350 pipes,Maraging C-350 tubes,Maraging C-350 springs