Products

Maraging C-200 Bars
Home > Products > Bars

We could produce Maraging C-200 bars, Maraging C200 bars,Maraging C-200 round bars, Maraging C-200 rods,Maraging C-200 square bars,Maraging C-200 flat bars,Maraging C-200 hot rolled bars, Maraging C200 cold drawn bright bars,Maraging C200 forged bars, Maraging C-200 forging bars,Maraging C-200 Hexagon Bar,Maraging C-200 rectangular bars from china.

The diameter of Maraging C-200 bars that we could do ranges from 6MM to 800MM. The length of Maraging C-200 bars that we could do is up to 15 metres

Maraging C-200  is usually supplied in the annealed condition where the microstructure consists of fine martensite before final heat treatment.

The chemical composition of Maraging C-200 bars is as follows

Element

Minimum (weight %)

Maximum (weight %)

Typical (weight %)

Co

8.5

Mo

3.25

Ni

18.5

Ti

.20

Mn

.10

Si

.10

Al

.10

C

.03

Zr

.01

P

.01

S

.01

B

.003


The mechanical property of Maraging C200 bars is as follows

Tensile Strength

ksi

MPa

205 min

1410 min


Yield Strength

ksi

MPa

200 min

1380 min

Hardness

42 HRC max


Elongation

8% min


We could produce Maraging C-200 bars as per the standard of ASTM B462 and ASTM B473

As per melting methods for Maraging C-200 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Maraging C-200 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Maraging C200 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.

Our Maraging C-200 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Maraging C-200 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Maraging C200 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Maraging C-200 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Maraging C-200 bars are widely used in Heavy Truck,Construction Equipment,Oil, Gas & Energy,Railway,Agriculture & Forestry,Ship Building,Cars & Light Vehicles,Defence,Aerospace Machining,Fabrications,General Engineering and so on

Please tell us the size and quantity of Maraging C-200 bars Maraging C-200 round bars, Maraging C200 rods,that you need, we are glad to quote the best price for you

Except Maraging C-200 bars,we also could produce Maraging C-200 flanges,Maraging C-200 plates,Maraging C-200 fastener,Maraging C-200 bolts,Maraging C-200 pipe fittings,Maraging C-200 pipes,Maraging C-200 tubes,Maraging C-200 springs