Products

MONEL 401 Bars
Home > Products > Bars

We could produce MONEL 401 bars, MONEL401 bars,MONEL 401 round bars, MONEL 401 rods,MONEL 401 square bars,MONEL 401 flat bars,MONEL 401 hot rolled bars, MONEL401 cold drawn bright bars,MONEL401 forged bars, MONEL 401 forging bars,Nimonic 90 Hexagon Bar,MONEL 401 rectangular bars from china.
The diameter of MONEL 401 bars that we could do ranges from 6MM to 800MM. The length of MONEL 401 bars that we could do is up to 15 metres
MONEL 401 is A copper-nickel alloy designed for specialized electrical and electronic applications

The chemical composition of MONEL 401 bars is as follows

Table 1- Limiting Chemical Composition, %,

of MONEL Alloy 401

Nickel....................................................................40.0-45.0

Carbon..................................................................0.10 max.

Manganese...........................................................2.25 max.

Iron........................................................................0.75 max.

Cobalt...................................................................0.25 max.

Sulfur...................................................................0.015 max.

Silicon...................................................................0.25 max.

Copper....................................................................Balance*


The mechanical property of MONEL401 bars is as follows

Tensile Strength, ksi..................................................................MIN 64

MPa.............................................................MIN  441

Yield Strength (0.2% Offset), ksi...........................................MIN.19.5

MPa........................................MIN ..134

Elongation, %..........................................................................MIN .51

Hardness, Rb............................................................................43


We could produce MONEL 401 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for MONEL 401 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of MONEL 401 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our MONEL401 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our MONEL 401 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply MONEL 401 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of MONEL401 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of MONEL 401 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our MONEL 401 bars are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

Please tell us the size and quantity of MONEL 401 bars MONEL 401 round bars, MONEL401 rods,that you need, we are glad to quote the best price for you
Except MONEL 401 bars,we also could produce MONEL 401 flanges,MONEL 401 plates,MONEL 401 fasteners,MONEL 401 bolts,MONEL 401 pipe fittings,MONEL 401 pipes,MONEL 401 tubes,MONEL 401 springs