Products

Inconel Alloy 718SPF Bars
Home > Products > Bars

We could produce Inconel Alloy 718SPF bars, Inconel 718SPF bars,Inconel Alloy 718SPF round bars, Inconel Alloy 718SPF rods,Inconel Alloy 718SPF square bars,Inconel Alloy 718SPF flat bars,Inconel Alloy 718SPF hot rolled bars, Inconel 718SPF cold drawn bright bars,Inconel 718SPF forged bars, Inconel Alloy 718SPF forging bars,Inconel Alloy 718SPF Hexagon Bar,Inconel Alloy 718SPF rectangular bars from china.

We could produce Inconel Alloy 718SPF bars with diamter from from 5MM to 1000MM and length up to 15 metres

Inconel Alloy 718SPF is optimized for the process by rigorous control of composition, melt practice and rolling conditions.

The chemical composition of Inconel Alloy 718SPF bars is as follows

Ni(+Co)....................................................................50.00-55.00

Cr..............................................................................17.00-21.00

Nb(+Ta)........................................................................4.75-5.25

Mo................................................................................2.80-3.30

Ti...................................................................................0.65-1.15

Al.................................................................................0.20-0.80

Co................................................................................1.00max.

C..................................................................................0.05max.

Mn...............................................................................0.35 max.

Si..................................................................................0.35max.

P.................................................................................0.015max.

S.................................................................................0.002max.

B.................................................................................0.006max.

Cu.................................................................................0.30max.

N...................................................................................0.01max.

Fe...................................................................................Balance†


The mechanical property of Inconel 718SPF bars is as follows

Tensile Properties (At Room Temp)

Property

Value

Tensile Strength

162 ksi

Yield Strength at  0.2% Offset

118 ksi

Elongation in 4D

33%


We could produce Inconel Alloy 718SPF bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of Inconel Alloy 718SPF bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of Inconel Alloy 718SPF bar

As per heat treatment of Inconel Alloy 718SPF bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply Inconel Alloy 718SPF round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of Inconel 718SPF bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of Inconel Alloy 718SPF bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Inconel Alloy 718SPF bars are widely used in high pressure pumps,Centrifugal pumps,power generators and nitrogen generators,Food Processing equipment and storage.Columns & Towers,Tanks ,Silos,Process Modules,Preheaters,Hydrogenators,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors

In order to export our Inconel 718SPF bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of Inconel Alloy 718SPF bars Inconel Alloy 718SPF round bars, Inconel 718SPF rods,that you need, we are glad to quote the best price for you

Except Inconel Alloy 718SPF bars,we also could produce Inconel Alloy 718SPF flanges,Inconel Alloy 718SPF plates,Inconel Alloy 718SPF fastener,Inconel Alloy 718SPF bolts,Inconel Alloy 718SPF fittings,Inconel Alloy 718SPF pipes,Inconel Alloy 718SPF tubes,Inconel Alloy 718SPF springs