We could produce Inconel 783 bars, Inconel783 bars,Inconel 783 round bars, Inconel 783 rods,Inconel 783 square bars,Inconel 783 flat bars,Inconel 783 hot rolled bars, Inconel783 cold drawn bright bars,Inconel783 forged bars, Inconel 783 forging bars,Inconel 783 Hexagon Bar,Inconel 783 rectangular bars from china.

We could produce Inconel 783 bars with diamter from from 5MM to 1000MM and length up to 15 metres

Inconel 783 are also known as high performance alloys specially designed to cater to environments with very high temperature of above 540°C (1000°F) where deformation resistance and high surface stability are essential.

The chemical composition of Inconel 783 bars is as follows

Element	Content (%)
Nickel,  Ni	26-30
Iron,  Fe	24-27
Aluminum,  Al	5-6
Chromium,  Cr	2.5-3.5
Niobium,  Nb	2.5-3.5
Copper,  Cu	0.50 max
Manganese,  Mn	0.50 max
Silicon,  Si	0.50 max
Titanium,  Ti	0.10-0.40
Carbon,  C	0.03 max
Boron,  B	0.003-0.012
Phosphorus,  P	0.015 max
Sulfur,  S	0.005 max
Cobalt,  Co	Balance

The mechanical property of Inconel783 bars is as follows

Properties	Metric	Imperial
Tensile  strength	1194 MPa	171 ksi
Yield  strength	779 MPa	113 ksi
Poisson’s  ratio	0.31	0.31
Elastic  modulus	177.3 GPA	25.72 ksi
Elongation  at break	24%	24%

We could produce Inconel 783 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of Inconel 783 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of Inconel 783 bar

As per heat treatment of Inconel 783 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply Inconel 783 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of Inconel783 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of Inconel 783 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Inconel 783 bars are widely used in Tanks & Vessels.Fluid Transfer Systems.Heat Transfer Systems,Plant Maintenance & Refurbishment Subcontractors.Separation Systems & Equipment Manufacturers,Biochemical Plant Equipment Manufacturers,Chemical Processing Equipment Manufacturers.Feedstock Processing Equipment Manufacturers,Pressure Vessel Manufacturers.Filtration Systems and so on

In order to export our Inconel783 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of Inconel 783 bars Inconel 783 round bars, Inconel783 rods,that you need, we are glad to quote the best price for you

Except Inconel 783 bars,we also could produce Inconel 783 flanges,Inconel 783 plates,Inconel 783 fastener,Inconel 783 bolts,Inconel 783 fittings,Inconel 783 pipes,Inconel 783 tubes,Inconel 783 springs