Products

Inconel 725 Bars
Home > Products > Bars

We could produce inconel 725 bars, inconel725 bars,inconel 725 round bars, inconel 725 rods,inconel 725 square bars,inconel 725 flat bars,inconel 725 hot rolled bars, inconel 725 cold drawn bright bars,inconel 725 forged bars, inconel 725 forging bars,inconel 725 Hexagon Bar,inconel 725 rectangular bars from china.

The diameter of inconel 725 bars that we could do ranges from 6MM to 800MM. The length of inconel 725 bars that we could do is up to 15 metres

Inconel 725 is a nickelchromium-molybdenum-niobium alloy that is highly resistant to corrosion and is age hardenable for extremely high strength

The chemical composition of inconel 725 bars is as follows

Nickel.........................................................................55.0-59.0

Chromium..................................................................19.0-22.5

Molybdenum..................................................................7.0-9.5

Niobium.......................................................................2.75-4.0

Titanium.........................................................................1.0-1.7

Aluminum..................................................................0.35max.

Carbon......................................................................0.03max.

Manganese...............................................................0.35max.

Silicon.......................................................................0.20max.

Phosphorus.............................................................0.015max.

Sulfur.......................................................................0.010max.

Iron..............................................................................Balance

The mechanical property of inconel 725 bars is as follows

Condition: SolutionAnnealed and Age Hardened (Minimum values)

U.T.S

150 KSI Min

0.2% Proof Stress

120 KSI Min

Elongation

20 %

NACE MR0175 limits the supply hardness to  43 HRC max. *

We could produce inconel 725 bars as per the standard of ASTM B166 and ASTM B564

As per melting methods for inconel 725 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of inconel 725 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our inconel 725 bars could be  100% ultrasonic test according to EN10228-3, SA388,,ASTM A531-1974, Sep 1921 C/c etc.

Our inconel 725 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply inconel 725 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of inconel 725 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of inconel 725 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our inconel 725 bars are widely used inWater Treatment Plants,Filtration Equipment Manufacturers,Pump Manufacturers,Purification Systems,Water Utility Companies,Sludge Treatment Plants,Desalination Plants,Reverse Osmosis Plants,Water Reuse Installations,Vintage Steam Engine Maintenance.Military Vehicle Producers,Automotive Component Manufacturers.Track Component Manufacturers and so on

Please tell us the size and quantity of inconel 725 bars inconel 725 round bars, inconel 725 rods,that you need, we are glad to quote the best price for you

Except inconel 725 bars,we also could produce inconel 725 flanges,inconel 725 plates,inconel 725 fastener,inconel 725 bolts,inconel 725 pipe fittings,inconel 725 pipes,inconel 725 tubes,inconel 725 springs