We could produce inconel 718 bars, inconel718 bars,inconel 718 round bars, inconel 718 rods,inconel 718 square bars,inconel 718 flat bars,inconel 718 hot rolled bars, inconel 718 cold drawn bright bars,inconel 718 forged bars, inconel 718 forging bars,inconel 718 Hexagon Bar,inconel 718 rectangular bars from china.

The diameter of inconel 718 bars that we could do ranges from 6MM to 800MM. The length of inconel 718 bars that we could do is up to 15 metres

Inconel 718 is high-strength, corrosion-resistant nickel chromium material used at -423° to 1300°F.

The chemical composition of inconel 718 bars is as follows

Table 1 - Limiting Chemical Compositiona, %

Nickel (plus Cobalt).......................................................50.00-55.00

Chromium......................................................................17.00-21.00

Iron.....................................................................................Balance*

Niobium (plusTantalum)....................................................4.75-5.50

Molybdenum.....................................................................2.80-3.30

Titanium.............................................................................0.65-1.15

Aluminum..........................................................................0.20-0.80

Cobalt...............................................................................1.00max.

Carbon..............................................................................0.08max.

Manganese .......................................................................0.35max.

Silicon...............................................................................0.35max.

Phosphorus.....................................................................0.015max.

Sulfur...............................................................................0.015max.

Boron..............................................................................0.006max.

The mechanical property of inconel 718 bars is as follows

Mechanical Properties
Typical room temperature properties, 1800°F annealed condition

Ultimate Tensile Strength, psi	.2% Yield Strength psi	Elongation %	Hardness Rockwell B
135,000	70,000	45	100

We could produce inconel 718 bars as per the standard of ASTM B637

As per melting methods for inconel 718 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of inconel 718 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our inconel 718 bars could be  100% ultrasonic test according to EN10228-3, SA388,,ASTM A531-1974, Sep 1921 C/c etc.

Our inconel 718 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply inconel 718 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of inconel 718 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of inconel 718 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our inconel 718 bars are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on

Please tell us the size and quantity of inconel 718 bars inconel 718 round bars, inconel 718 rods,that you need, we are glad to quote the best price for you

Except inconel 718 bars,we also could produce inconel 718 flanges,inconel 718 plates,inconel 718 fastener,inconel 718 bolts,inconel 718 pipe fittings,inconel 718 pipes,inconel 718 tubes,inconel 718 springs