Products

Inconel 706 Bars
Home > Products > Bars

We could produce inconel 706 bars, inconel706 bars,inconel 706 round bars, inconel 706 rods,inconel 706 square bars,inconel 706 flat bars,inconel 706 hot rolled bars, inconel 706 cold drawn bright bars,inconel 706 forged bars, inconel 706 forging bars,inconel 706 Hexagon Bar,inconel 706 rectangular bars from china.

The diameter of inconel 706 bars that we could do ranges from 6MM to 800MM. The length of inconel 706 bars that we could do is up to 15 metres

Inconel 706  is a nickel-chromium-iron precipitation-hardening alloy

The chemical composition of inconel 706 bars is as follows

Elements

Content (%)

Nickel, Ni

39-44

Iron, Fe

38

Chromium, Cr

14.5-17.5

Niobium, Nb

2.50-3.30

Cobalt, Co

≤ 1

Titanium, Ti

≤ 0.40

Copper, Cu

≤ 0.35

Manganese, Mn

≤ 0.35

Silicon, Si

≤ 0.35

Carbon, C

≤ 0.30

Aluminum, Al

≤ 0.060

Phosphorous, P

≤ 0.020

Sulfur, S

≤ 0.015

Boron, B

≤ 0.0060


The mechanical property of inconel 706 bars is as follows

Properties

Metric

Imperial

Tensile strength

757 MPa

109800 psi

Yield strength (at strain 0.200%)

383 MPa

55500 psi

Poisson’s ratio (precipitation hardened, calculated by mfr)

0.382

0.382

Modulus of elasticity (precipitation hardened, dynamic method)

210 GPa

30500 ksi

Elongation at break

47%

47%


We could produce inconel 706 bars as per the standard of ASTM B166 and ASTM B564

As per melting methods for inconel 706 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of inconel 706 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our inconel 706 bars could be  100% ultrasonic test according to EN10228-3, SA388,,ASTM A531-1974, Sep 1921 C/c etc.

Our inconel 706 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply inconel 706 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of inconel 706 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of inconel 706 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our inconel 706 bars are widely used in bearing industry, power-generation including steam and gas-turbine, wind energy, mining and construction equipment, oil & gas, petrochemical, defense, rail transportation, and a wide variety of general industrial applications and so on

Please tell us the size and quantity of inconel 706 bars inconel 706 round bars, inconel 706 rods,that you need, we are glad to quote the best price for you

Except inconel 706 bars,we also could produce inconel 706 flanges,inconel 706 plates,inconel 706 fastener,inconel 706 bolts,inconel 706 pipe fittings,inconel 706 pipes,inconel 706 tubes,inconel 706 springs