We could produce inconel 686 bars, inconel686 bars,inconel 686 round bars, inconel 686 rods,inconel 686 square bars,inconel 686 flat bars,inconel 686 hot rolled bars, inconel 686 cold drawn bright bars,inconel 686 forged bars, inconel 686 forging bars,inconel 686 Hexagon Bar,inconel 686 rectangular bars from china.

The diameter of inconel 686 bars that we could do ranges from 6MM to 800MM. The length of inconel 686 bars that we could do is up to 15 metres

Inconel 686 is An alloy designed for outstanding corrosion resistance in a wide range of severe environments

The chemical composition of inconel 686 bars is as follows

Mn 0.75 max.

S 0.02 max.

Si 0.08 max.

P 0.04 max.

Ni Balance

Cr 19.0 - 23.0

Mo 15.0 - 17.0

W 3.0 - 4.4

Ti 0.02 - 0.25

Fe 1.0 max.

C 0.01 max.

The mechanical property of inconel 686 bars is as follows

Properties	Metric	Imperial
Tensile strength	721.9 MPa	104700 psi
Yield strength (@strain 0.200%)	364 MPa	52800 psi
Elastic modulus	207 GPa	30000 ksi
Shear modulus	77 GPa	11200 ksi
Poisson’s ratio	0.34	0.34
Elongation at break	71%	71%

We could produce inconel 686 bars as per the standard of ASTM B462 and ASTM B574

As per melting methods for inconel 686 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of inconel 686 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our inconel 686 bars could be  100% ultrasonic test according to EN10228-3, SA388,,ASTM A531-1974, Sep 1921 C/c etc.

Our inconel 686 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply inconel 686 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of inconel 686 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of inconel 686 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our inconel 686 bars are widely used in Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on

Please tell us the size and quantity of inconel 686 bars inconel 686 round bars, inconel 686 rods,that you need, we are glad to quote the best price for you

Except inconel 686 bars,we also could produce inconel 686 flanges,inconel 686 plates,inconel 686 fastener,inconel 686 bolts,inconel 686 pipe fittings,inconel 686 pipes,inconel 686 tubes,inconel 686 springs