Products

Incoloy DS Bars
Home > Products > Bars

We could produce Incoloy DS bars,Incoloy DS bars,Incoloy DS round bars,Incoloy DS rods,Incoloy DS square bars,Incoloy DS flat bars,Incoloy DS hot rolled bars, Incoloy DS cold drawn bright bars,Incoloy DS forged bars, Incoloy DS forging bars,Incoloy DS Hexagon Bar,Incoloy DS rectangular bars from china.

The diameter of Incoloy DS bars that we could do ranges from 6MM to DSMM. The length of Incoloy DS bars that we could do is up to 15 metres

Incoloy DS is a heat resistant iron-nickel-chromium alloy especially resistant to carburization and/or alternating oxidation-carburization hot environments.

The chemical composition of incoloy DS bar is as follows:

Ni¹

34.50 -

41.00

%

Fe

Balance

Cr

17.00 -

19.00

%

Si

1.90 -

2.60

%

Mn

0.80 -

1.50

%

Cu

max.

0.50

%

Ti

max.

0.20

%

C

max.

0.10

%

S

max.

0.02

%

Limiting

The mechanical property of Incoloy DS bars is as follows

Properties

Metric

Imperial

Tensile strength (solution annealed, value at room temperature)

580 MPa

84100 psi

Yield strength (@ strain 0.200%, precipitation hardened, value at room  temperature)

215 MPa

31200 psi

Elongation at break (solution annealed)

60%

60%

We could produce Incoloy DS bars as per the standard of ASTM B408 and ASTM B564

As per melting methods for Incoloy DS bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Incoloy DS bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Incoloy DS bars could be  100% ultrasonic test according to EN10228-3, SA388,,ASTM A531-1974, Sep 1921 C/c etc.

Our Incoloy DS bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Incoloy DS round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Incoloy DS bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Incoloy DS bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Incoloy DS bars are widely used in heat exchangers,air receivers,pressure vessels,Stripper columns, separators, splitter, columns, hydro treaters, hydro crackers, desalters,shipping building and Aviation,drilling stations, pipelines and refineries,processing units,mechanical equipment, crystalizer equipment,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors, power generators and nitrogen generators and so on,

Please tell us the size and quantity of Incoloy DS bars Incoloy DS round bars, Incoloy DS rods,that you need, we are glad to quote the best price for you

Except Incoloy DS bars,we also could produce Incoloy DS flanges,Incoloy DS plates,Incoloy DS fastener,Incoloy DS bolts,Incoloy DS pipe fittings,Incoloy DS pipes,Incoloy DS tubes,Incoloy DS springs