Products

Incoloy 908 Bars
Home > Products > Bars

We could produce Incoloy 908 bars, Incoloy908 bars,Incoloy 908 round bars, Incoloy 908 rods,Incoloy 908 square bars,Incoloy 908 flat bars,Incoloy 908 hot rolled bars, Incoloy908 cold drawn bright bars,Incoloy908 forged bars, Incoloy 908 forging bars,Incoloy 908 Hexagon Bar,Incoloy 908 rectangular bars from china.
The diameter of Incoloy 908 bars that we could do ranges from 6MM to 800MM. The length of Incoloy 908 bars that we could do is up to 15 metres
Incoloy 908 is an agehardenable nickel-iron alloy which exhibits a low coefficient of thermal expansion, high tensile strength, high fracture and impact toughness, fatigue crack growth resistance, good ductility, metallurgical stability

The chemical composition of Incoloy 908 bars is as follows

Element

Content (%)

Nickel, Ni

47 - 51

Iron, Fe

35.588 - 44.6

Chromium, Cr

3.75 - 4.5

Niobium, Nb (Columbium, Cb)

2.7 - 3.3

Titanium, Ti

1.2 - 1.8

Manganese, Mn

≤1

Aluminum, Al

0.75 - 1.25

Cobalt, Co

≤0.50

Copper, Cu

≤0.50

Silicon, Si

≤0.50

Carbon, C

≤0.030

Phosphorous, P

≤0.015

Boron, B

≤0.012

Sulfur, S


The mechanical property of Incoloy908 bars is as follows

Properties

Metric

Imperial

Tensile strength

1172 MPa

170000 psi

Yield strength

827 MPa

120000 psi

Elongation at break

12%

12%


We could produce Incoloy 908 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for Incoloy 908 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of Incoloy 908 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our Incoloy908 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our Incoloy 908 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply Incoloy 908 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of Incoloy908 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of Incoloy 908 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our Incoloy 908 bars are widely used in chemical pump,plunger pumps,Cement Mill ,sugar Mill,concrete mills and mixers,processing units,mechanical equipment, crystalizer equipment,Wellhead and Christmas tree,power transmission, turbine,gas compressor,gear boxes and so on.

Please tell us the size and quantity of Incoloy 908 bars Incoloy 908 round bars, Incoloy908 rods,that you need, we are glad to quote the best price for you
Except Incoloy 908 bars,we also could produce Incoloy 908 flanges,Incoloy 908 plates,Incoloy 908 fasteners,Incoloy 908 bolts,Incoloy 908 pipe fittings,Incoloy 908 pipes,Incoloy 908 tubes,Incoloy 908 springs