Products

Incoloy 803 Bars
Home > Products > Bars

We could produce Incoloy 803 bars, Incoloy803 bars,Incoloy 803 round bars, Incoloy 803 rods,Incoloy 803 square bars,Incoloy 803 flat bars,Incoloy 803 hot rolled bars, Incoloy803 cold drawn bright bars,Incoloy803 forged bars, Incoloy 803 forging bars,Nimonic 90 Hexagon Bar,Incoloy 803 rectangular bars from china.
The diameter of Incoloy 803 bars that we could do ranges from 6MM to 800MM. The length of Incoloy 803 bars that we could do is up to 15 metres
Incoloy 803 Is an iron-nickelchromium alloy, is designed for use in petrochemical, chemical and thermal processing applications.

The chemical composition of Incoloy 803 bars is as follows

Table 1 - Limiting Chemical Composition, %

Nickel ..........................................................................32.0-37.0

Chromium....................................................................25.0-29.0

Iron ...............................................................................Balance*

Carbon ........................................................................0.06-0.10

Aluminum ....................................................................0.15-0.60

Titanium.......................................................................0.15-0.60

Copper........................................................................0.75 max.

Sulfur ........................................................................0.015 max.

Manganese ...................................................................1.5 max.

Silicon ...........................................................................1.0 max.


The mechanical property of Incoloy803 bars is as follows

Properties

Metric

Tensile strength(sheet, cold rolled and solution annealed)

552-621 MPa

Yield strength(rod, hot finished and solution annealed)

207-255 MPa

Elongation at Break( sheet, cold rolled and solution annealed)

40-45%

Poissons Ratio

0.32


We could produce Incoloy 803 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for Incoloy 803 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of Incoloy 803 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our Incoloy803 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our Incoloy 803 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply Incoloy 803 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of Incoloy803 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of Incoloy 803 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our Incoloy 803 bars are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

Please tell us the size and quantity of Incoloy 803 bars Incoloy 803 round bars, Incoloy803 rods,that you need, we are glad to quote the best price for you
Except Incoloy 803 bars,we also could produce Incoloy 803 flanges,Incoloy 803 plates,Incoloy 803 fasteners,Incoloy 803 bolts,Incoloy 803 pipe fittings,Incoloy 803 pipes,Incoloy 803 tubes,Incoloy 803 springs