We could produce Incoloy 27-7MO bars, Incoloy Alloy 27-7MO bars,Incoloy 27-7MO round bars, Incoloy 27-7MO rods,Incoloy 27-7MO square bars,Incoloy 27-7MO flat bars,Incoloy 27-7MO hot rolled bars, Incoloy Alloy 27-7MO cold drawn bright bars,Incoloy Alloy 27-7MO forged bars, Incoloy 27-7MO forging bars,Incoloy 27-7MO Hexagon Bar,Incoloy 27-7MO rectangular bars from china.

The diameter of Incoloy 27-7MO bars that we could do ranges from 6MM to 800MM. The length of Incoloy 27-7MO bars that we could do is up to 15 metres

Incoloy 27-7MO  is an advanced super-austenitic stainless steel containing 7% of molybdenum.

The chemical composition of Incoloy 27-7MO bars is as follows

Table 1 - Limiting Chemical Composition, wt%

Nickel..........................................................................26.0-28.0

Chromium....................................................................20.5-23.0

Molybdenum...................................................................6.5-8.0

Copper............................................................................0.5-1.5

Nitrogen...........................................................................0.3-0.4

Iron...............................................................................Balance*

Manganese.................................................................3.00 max.

Phosphorus................................................................0.03 max.

Sulfur..........................................................................0.01max.

Silicon...........................................................................0.5max.

Carbon......................................................................0.020max.

The mechanical property of Incoloy Alloy 27-7MO bars is as follows

Mechanical Property   Requirements
	Ultimate Tensile	Yield Strength (0.2% OS)	Elong.	R/A	Hardness
Min	120 KSi	60 KSi	50		Rb 95
Max
Min	827 MPa	414 MPa
Max

We could produce Incoloy 27-7MO bars as per the standard of ASTM B462 and ASTM B473

As per melting methods for Incoloy 27-7MO bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Incoloy 27-7MO bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Incoloy Alloy 27-7MO bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.

Our Incoloy 27-7MO bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Incoloy 27-7MO round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Incoloy Alloy 27-7MO bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Incoloy 27-7MO bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Incoloy 27-7MO bars are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on

Please tell us the size and quantity of Incoloy 27-7MO bars Incoloy 27-7MO round bars, Incoloy Alloy 27-7MO rods,that you need, we are glad to quote the best price for you

Except Incoloy 27-7MO bars,we also could produce Incoloy 27-7MO flanges,Incoloy 27-7MO plates,Incoloy 27-7MO fastener,Incoloy 27-7MO bolts,Incoloy 27-7MO pipe fittings,Incoloy 27-7MO pipes,Incoloy 27-7MO tubes,Incoloy 27-7MO springs