Products

Hastelloy G-50 Bars
Home > Products > Bars

We could produce Hastelloy G-50 bars, Hastelloy G50 bars,Hastelloy G-50 round bars, Hastelloy G-50 rods,Hastelloy G-50 square bars,Hastelloy G-50 flat bars,Hastelloy G-50 hot rolled bars, Hastelloy G50 cold drawn bright bars,Hastelloy G50 forged bars, Hastelloy G-50 forging bars,Hastelloy G-50 Hexagon Bar,Hastelloy G-50 rectangular bars from china.

The diameter of Hastelloy G-50 bars that we could do ranges from 6MM to 800MM. The length of Hastelloy G-50 bars that we could do is up to 15 metres

Hastelloy G-50 is nickel-chromium-molybdenum alloy

The chemical composition of Hastelloy G-50 bars is as follows

Al

0.4 max

C

0.02 max

Cr

19 - 21

Co

2.5 min

Cu

0.5 max

Fe

15 - 20

Mn

1 max

Mo

8 - 10

Ni

Balance

Nb

0.5 max

P

0.04 max

Si

1 max

S

0.015 max

W

1 max

The mechanical property of Hastelloy G50 bars is as follows

Properties

Metric

Imperial

Tensile strength

≥ 760 MPa

≥ 110000 psi

Yield strength (@ strain 0.200%)

700-860 MPa

102000-125000 psi

Elongation at break (in 50 mm)

≥ 20%

≥ 20%

Hardness, Brinell (estimated from Rockwell C for Brinell 10 mm ball/3000  kg load)

290

290

Hardness, Knoop (estimated from Rockwell C)

345

345

Hardness, Rockwell A (estimated from Rockwell C)

66

66

Hardness, Rockwell C

≤ 31

≤ 31

Hardness, Vickers (estimated from Rockwell C)

300

300

We could produce Hastelloy G-50 bars as per the standard of ASTM B581

As per melting methods for Hastelloy G-50 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Hastelloy G-50 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Hastelloy G50 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A531-1974, Sep 1921 C/c etc.

Our Hastelloy G-50 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Hastelloy G-50 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Hastelloy G50 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Hastelloy G-50 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Hastelloy G-50 bars are widely used in Quarry & Opencast Mine Maintenance ,Mining & Excavation Plant Equipment ,Deep Mining Pit Maintenance & Repair ,Conveyor Equipment Manufacturers .Mine Construction & Site Extension Construction Impact, Jaw & Cone Crusher Manufacturers,Drilling, Scalping & Screener Equipment Manufacturers and so on

Please tell us the size and quantity of Hastelloy G-50 bars Hastelloy G-50 round bars, Hastelloy G50 rods,that you need, we are glad to quote the best price for you

Except Hastelloy G-50 bars,we also could produce Hastelloy G-50 flanges,Hastelloy G-50 plates,Hastelloy G-50 fastener,Hastelloy G-50 bolts,Hastelloy G-50 pipe fittings,Hastelloy G-50 pipes,Hastelloy G-50 tubes,Hastelloy G-50 springs