Products

HIPERCO 50 Bars
Home > Products > Bars

We could produce HIPERCO 50 bars, HIPERCO 50A bars,HIPERCO 50 round bars, HIPERCO 50 rods,HIPERCO 50 square bars,HIPERCO 50 flat bars,HIPERCO 50 hot rolled bars, HIPERCO 50A cold drawn bright bars,HIPERCO 50A forged bars, HIPERCO 50 forging bars,HIPERCO 50 Hexagon Bar,HIPERCO 50 rectangular bars from china.
The diameter of HIPERCO 50 bars that we could do ranges from 6MM to 800MM. The length of HIPERCO 50 bars that we could do is up to 15 metres
HIPERCO 50 is an iron-cobalt-vanadium soft magnetic alloy which exhibits high magnetic saturation (24 kilogauss), high D.C. maximum permeability, low D.C. coercive force, and low A.C. core loss.

The chemical composition of HIPERCO 50 bars is as follows

Element

Min

Max

Carbon

--

0.01

Manganese

--

0.05

Silicon

--

0.05

Cobalt

--

48.75

Vanadium

--

1.90

Iron

Bal


The mechanical property of HIPERCO 50A bars is as follows

Properties

Metric

Imperial

Tensile strength

1345 MPa

195100 psi

Yield strength (@ strain 0.200%)

1275 MPa

184900 psi

Elongation at break (in 50 mm)

1%

1%

Hardness, Brinell (estimated from Rockwell C for 3000 kg load, 10 mm ball Brinell measurement)

334

334

Hardness, Knoop (converted from Rockwell C )

363

363

Hardness, Rockwell C

36

36

Hardness, Vickers (estimated from Rockwell C)

349

349


We could produce HIPERCO 50 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for HIPERCO 50 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of HIPERCO 50 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our HIPERCO 50A bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our HIPERCO 50 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply HIPERCO 50 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of HIPERCO 50A bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of HIPERCO 50 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our HIPERCO 50 bars are widely used in Water Treatment Plants,Filtration Equipment Manufacturers,Pump Manufacturers,Purification Systems,Water Utility Companies,Sludge Treatment Plants,Desalination Plants,Reverse Osmosis Plants,Water Reuse Installations,Vintage Steam Engine Maintenance.Military Vehicle Producers,Automotive Component Manufacturers.Track Component Manufacturers and so on

Please tell us the size and quantity of HIPERCO 50 bars HIPERCO 50 round bars, HIPERCO 50A rods,that you need, we are glad to quote the best price for you
Except HIPERCO 50 bars,we also could produce HIPERCO 50 flanges,HIPERCO 50 plates,HIPERCO 50 fasteners,HIPERCO 50 bolts,HIPERCO 50 pipe fittings,HIPERCO 50 pipes,HIPERCO 50 tubes,HIPERCO 50 springs