Products

HAYNES HR-160 Bars
Home > Products > Bars

We could produce HAYNES HR-160 bars, HAYNES HR160 bars,HAYNES HR-160 round bars, HAYNES HR-160 rods,HAYNES HR-160 square bars,HAYNES HR-160 flat bars,HAYNES HR-160 hot rolled bars, HAYNES HR160 cold drawn bright bars,HAYNES HR160 forged bars, HAYNES HR-160 forging bars,Nimonic 90 Hexagon Bar,HAYNES HR-160 rectangular bars from china.
The diameter of HAYNES HR-160 bars that we could do ranges from 6MM to 800MM. The length of HAYNES HR-160 bars that we could do is up to 15 metres
HAYNES HR-160 is a solid-solution-strengthened nickel-cobalt-chromium-silicon alloy with outstanding resistance to various forms of high-temperature corrosion attack.

The chemical composition of HAYNES HR-160 bars is as follows

Nominal Chemical Composition, Weight Percent

Ni

Co

Cr

Fe

Si

Mn

Ti

C

W

Mo

Cb


37a

29

28

2*

2.75

0.5

0.5

0.05

1*

1*

1*

aAs Balance *Maximum


The mechanical property of HAYNES HR160 bars is as follows

Test
Temperature

Ultimate Tensile Strength

Yield Strength
at 0.2% Offset

Elongation in 1.340 in. (34.0 mm)

Reduction
of Area


°F

(°C)

Ksi

MPa

Ksi

MPa

%

%


70

(21)

111.2

767

45.6

314

68

73


We could produce HAYNES HR-160 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for HAYNES HR-160 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of HAYNES HR-160 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our HAYNES HR160 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our HAYNES HR-160 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply HAYNES HR-160 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of HAYNES HR160 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of HAYNES HR-160 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our HAYNES HR-160 bars are widely used in bearing industry, power-generation including steam and gas-turbine, wind energy, mining and construction equipment, oil & gas, petrochemical, defense, rail transportation, and a wide variety of general industrial applications and so on

Please tell us the size and quantity of HAYNES HR-160 bars HAYNES HR-160 round bars, HAYNES HR160 rods,that you need, we are glad to quote the best price for you
Except HAYNES HR-160 bars,we also could produce HAYNES HR-160 flanges,HAYNES HR-160 plates,HAYNES HR-160 fasteners,HAYNES HR-160 bolts,HAYNES HR-160 pipe fittings,HAYNES HR-160 pipes,HAYNES HR-160 tubes,HAYNES HR-160 springs