Products

HAYNES HR-120 Bars
Home > Products > Bars

We could produce HAYNES HR-120 bars, HAYNES HR120 bars,HAYNES HR-120 round bars, HAYNES HR-120 rods,HAYNES HR-120 square bars,HAYNES HR-120 flat bars,HAYNES HR-120 hot rolled bars, HAYNES HR120 cold drawn bright bars,HAYNES HR120 forged bars, HAYNES HR-120 forging bars,Nimonic 90 Hexagon Bar,HAYNES HR-120 rectangular bars from china.
The diameter of HAYNES HR-120 bars that we could do ranges from 6MM to 800MM. The length of HAYNES HR-120 bars that we could do is up to 15 metres
HAYNES HR-120 is A solid-solution-strengthened,heat-resistant alloy that provides excellent strength at elevated temperature combined with very good resistance to carburizing and sulfidizing environments.

The chemical composition of HAYNES HR-120 bars is as follows

Elements

Content (%)

Nickel, Ni

30 - 45

Chromium, Cr

12 - 32

Cobalt, Co

5

Molybdenum, Mo

5

Columbium + Tantalum (Cb + Ta)

4

Silicon, Si

3

Manganese, Mn

2

Carbon, C

0.20


The mechanical property of HAYNES HR120 bars is as follows

Properties

Metric

Imperial

Tensile strength

450 MPa

65300 psi

Yield strength

240 MPa

34800 psi

Elongation at break

25%

25%


We could produce HAYNES HR-120 bars as per the standard of ASTM B462 and ASTM B473
As per melting methods for HAYNES HR-120 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients
As per heat treatment of HAYNES HR-120 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients
Our HAYNES HR120 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.
Our HAYNES HR-120 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995
We could supply HAYNES HR-120 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)
In order to control the quality of HAYNES HR120 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.
As per surface finish of HAYNES HR-120 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface
Our HAYNES HR-120 bars are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

Please tell us the size and quantity of HAYNES HR-120 bars HAYNES HR-120 round bars, HAYNES HR120 rods,that you need, we are glad to quote the best price for you
Except HAYNES HR-120 bars,we also could produce HAYNES HR-120 flanges,HAYNES HR-120 plates,HAYNES HR-120 fasteners,HAYNES HR-120 bolts,HAYNES HR-120 pipe fittings,HAYNES HR-120 pipes,HAYNES HR-120 tubes,HAYNES HR-120 springs