Products

Custom 465 Bars
Home > Products > Bars

We could produce Custom 465 bars, Custom465 bars,Custom 465 round bars, Custom 465 rods,Custom 465 square bars,Custom 465 flat bars,Custom 465 hot rolled bars, Custom465 cold drawn bright bars,Custom465 forged bars, Custom 465 forging bars,Custom 465 Hexagon Bar,Custom 465 rectangular bars from china.

We could produce Custom 465 bars with diamter from from 5MM to 1000MM and length up to 15 metres

Custom 465 is a martensitic, age hardenable alloy.

The chemical composition of Custom 465 bars is as follows

Chemical Composition Limits

Weight%

C

P

Si

Ni

Ti

Mn

S

Cr

Mo

Fe

Custom 465

0.02 max

0.015 max

0.25 max

10.75-11.25

1.5-1.8

0.25 max

0.010 max

11.0 -12.5

0.75-1.25

Bal


The mechanical property of Custom465 bars is as follows

Material

Condition

Orientation

0.2 % Yield Strength (Mpa)

Ultimate Tensile Strength (Mpa)

% Elongation in 4D

% Reduction of Area

Notch Tensile Strength

NTS/UTS

Charpy V Notch Impact

Rockwell C Hardness

Custom 465

H950

Long

1655

1765

12

57

2475

1.40

16

49.5

Custom 465

H950

Trans

1648

1765

11

49

2386

1.35

13

49.5

Custom 465

H1000

Long

1496

1593

14

63

2427

1.52

35

47.5

Custom 465

H1000

Trans

1503

1600

13

57

2392

1.50

28

47.5


We could produce Custom 465 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of Custom 465 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of Custom 465 bar

As per heat treatment of Custom 465 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply Custom 465 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of Custom465 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of Custom 465 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Custom 465 bars are widely used in Oil Refineries,Valve & Wellhead equipment manufacturers,Chemical & Petrochemical Complexes,Oil & Gas industries,Heat Exchanger manufacturers,Pressure Vessel manufacturers,Fertilizer Plants,Thermal Power Plants,Nuclear Power Plants,Original Equipment manufacturers to Oil & Gas Industries,Engineering & Process Management Consultants and so on

In order to export our Custom465 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of Custom 465 bars Custom 465 round bars, Custom465 rods,that you need, we are glad to quote the best price for you

Except Custom 465 bars,we also could produce Custom 465 flanges,Custom 465 plates,Custom 465 fastener,Custom 465 bolts,Custom 465 fittings,Custom 465 pipes,Custom 465 tubes,Custom 465 springs