Products

Custom 450 Bars
Home > Products > Bars

We could produce Custom 450 bars, Custom450 bars,Custom 450 round bars, Custom 450 rods,Custom 450 square bars,Custom 450 flat bars,Custom 450 hot rolled bars, Custom450 cold drawn bright bars,Custom450 forged bars, Custom 450 forging bars,Custom 450 Hexagon Bar,Custom 450 rectangular bars from china.

We could produce Custom 450 bars with diamter from from 5MM to 1000MM and length up to 15 metres

Custom 450 is a martensitic stainless that combines corrosion resistance similar to 304, easy fabrication and single step age hardenability yielding good strength and ductility.

The chemical composition of Custom 450 bars is as follows

Carbon

0.05 max

Chromium

14 - 16

Copper

1.25 - 1.75

Iron

Balance

Manganese

1 max

Molybdenum

0.5 - 1

Nickel

5 - 7

Niobium

Min:8 x C

Phosphorus

0.03 max

Silicon

1 max

Sulphur

0.03 max


The mechanical property of Custom450 bars is as follows

Mechanical Properties (Solution Treated)

Property

Value

Tensile Strength

125.0 ksi (860 MPa)

Yield Strength at 0.2% Offset

95.0 ksi (655 MPa)

Elongation in 4D

10%

Reduction of Area

40%


We could produce Custom 450 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of Custom 450 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of Custom 450 bar

As per heat treatment of Custom 450 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply Custom 450 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of Custom450 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of Custom 450 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Custom 450 bars are widely used in chemical pump,plunger pumps,Cement Mill ,sugar Mill,concrete mills and mixers,processing units,mechanical equipment, crystalizer equipment,Wellhead and Christmas tree,power transmission, turbine,gas compressor,gear boxes and so on.

In order to export our Custom450 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of Custom 450 bars Custom 450 round bars, Custom450 rods,that you need, we are glad to quote the best price for you

Except Custom 450 bars,we also could produce Custom 450 flanges,Custom 450 plates,Custom 450 fastener,Custom 450 bolts,Custom 450 fittings,Custom 450 pipes,Custom 450 tubes,Custom 450 springs