Products

Alloy 45TM Bars
Home > Products > Bars

We could produce Alloy 45TM bars, Alloy45TM bars,Alloy 45TM round bars, Alloy 45TM rods,Alloy 45TM square bars,Alloy 45TM flat bars,Alloy 45TM hot rolled bars, Alloy45TM cold drawn bright bars,Alloy45TM forged bars, Alloy 45TM forging bars,Alloy 45TM Hexagon Bar,Alloy 45TM rectangular bars from china.

The diameter of Alloy 45TM bars that we could do ranges from 6MM to 800MM. The length of Alloy 45TM bars that we could do is up to 15 metres

Alloy 45TM is chiefly used in high-temperature applications with extremely corrosive media, such as oil ash corrosion, incineration gases, sulfur dioxide, caustic solution corrosion.

The chemical composition of Alloy 45TM bars is as follows

Chemical  composition

C
≤ %

Si
%

Mn
≤ %

P
≤ %

S*
≤ %

Cr
%

Mo
%

Ni
%

V
%

0,05-0,12

2,5-3,0

1,0

0,02

0,011

26,0-29,0

45,0 min.

Nb
%

Ti
%

Al
≤ %

Co
%

Cu
≤ %

N
%

Fe
%

Ce
%

Y
%

0,2

0,3

21,0-25,0

0,03-0,08

We could produce Alloy 45TM bars as per the standard of ASTM B462 and ASTM B473

As per melting methods for Alloy 45TM bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of Alloy 45TM bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our Alloy45TM bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A545TM-1974, Sep 1921 C/c etc.

Our Alloy 45TM bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply Alloy 45TM round bars certificate as per the standard of EN1045TM4-3.1 or EN1045TM4-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of Alloy45TM bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of Alloy 45TM bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our Alloy 45TM bars are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

Please tell us the size and quantity of Alloy 45TM bars Alloy 45TM round bars, Alloy45TM rods,that you need, we are glad to quote the best price for you

Except Alloy 45TM bars,we also could produce Alloy 45TM flanges,Alloy 45TM plates,Alloy 45TM fastener,Alloy 45TM bolts,Alloy 45TM pipe fittings,Alloy 45TM pipes,Alloy 45TM tubes,Alloy 45TM springs