We could produce AISI 310 bars, 310 bars,AISI 310 round bars, AISI 310 rods,AISI 310 square bars,AISI 310 flat bars,AISI 310 hot rolled bars, 310 cold drawn bright bars,310 forged bars, AISI 310 forging bars,Nimonic 90 Hexagon Bar,AISI 310 rectangular bars from china.

The diameter of AISI 310 bars that we could do ranges from 6MM to 800MM. The length of AISI 310 bars that we could do is up to 15 metres

AISI 310 is designed for high temperature service. Despite that it combines excellent high temperature properties with good ductility and weldability. It resists oxidation in continuous service at temperatures up to 1150°C

The chemical composition of AISI 310 bars is as follows

Grade		C	Mn	Si	P	S	Cr	Mo	Ni	N
310	min. max.	- 0.25	- 2.00	- 1.50	- 0.045	- 0.030	24.0 26.0	-	19.0 22.0	-

The mechanical property of 310 bars is as follows

Grade	Tensile Strength (MPA) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50 mm) min	Hardness
				Rockwell B (HR B) max	Brinell (HB) max
AISI 310	515	205	40	95	217

We could produce AISI 310 bars as per the standard of ASTM B462 and ASTM B473

As per melting methods for AISI 310 bars, we could use AOD refining or vacuum induction melting. Vacuum arc or electroslag remelting procedure as per the requirement of the clients

As per heat treatment of AISI 310 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

Our 310 bars could be  100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc.

Our AISI 310 bars could be 100%  Liquid Penetrant Examination as per the ASTM E165-1995

We could supply AISI 310 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like TUV,DNV,GL,and so on)

In order to control the quality of 310 bars, we have following inspection equipment in our workshop:Metallurgical analysis, Tensile strength tester, Hardness tester, Altimeter, Scale Micrometer, pressure tester, etc.

As per surface finish of AISI 310 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our AISI 310 bars are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

Please tell us the size and quantity of AISI 310 bars AISI 310 round bars, 310 rods,that you need, we are glad to quote the best price for you

Except AISI 310 bars,we also could produce AISI 310 flanges,AISI 310 plates,AISI 310 fasteners,AISI 310 bolts,AISI 310 pipe fittings,AISI 310 pipes,AISI 310 tubes,AISI 310 springs