Products

1.4898 Bars
Home > Products > Bars

We could produce 1.4898 bars, EN 1.4898 bars,1.4898 round bars, 1.4898 rods,1.4898 square bars,1.4898 flat bars,1.4898 hot rolled bars, EN 1.4898 cold drawn bright bars,EN 1.4898 forged bars, 1.4898 forging bars,1.4898 Hexagon Bar,1.4898 rectangular bars from china.

We could produce 1.4898 bars with diamter from from 5MM to 1000MM and length up to 15 metres

1.4898 A nickel-iron-chromium alloy containing titanium and aluminum for precipitation hardening and molybdenum for solid-solution strengthening.

The chemical composition of 1.4898 bars is as follows

Element

Content (%)

Nickel, Ni

41-43 .5

Chromium, Cr

11-14

Titanium, Ti

2.2-2.75

Silicon, Si

1 max

Manganese, Mn

0.8 max

Copper, Cu

0.5 max

Aluminum, Al

0.35 max

Carbon, C

0.1 max

Phosphorus, P

0.04 max

Sulfur, S

0.04 max

Boron, B

0.01 - 0.02

Iron, Fe

Remainder


The mechanical property of EN 1.4898 bars is as follows

Test
 Temperature

0.2% Offset
 Yield Strength

Ultimate
 Tensile Strength

% Elongation
 in 2"

% Reduction
 of Area

°F

°C

ksi

MPa

ksi

MPa

70
 800
 1000
 1200
 1300
 1400
 1500

21.1
 427
 538
 649
 704
 760
 816

125.0
 116.5
 113
 117
 114
 102.5
 79

862
 803
 779
 807
 786
 707
 545

175
 159
 156
 150
 130
 107.5
 81

1207
 1096
 1076
 1034
 896
 741
 559

15.0
 16.0
 17.0
 14.0
 11.5
 9.0
 13.0

19.0
 25.5
 29.0
 21.0
 15.5
 14.5
 20.0


We could produce 1.4898 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of 1.4898 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of 1.4898 bar

As per heat treatment of 1.4898 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply 1.4898 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of EN 1.4898 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of 1.4898 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our 1.4898 bars are widely used in equipment for the manufacture of synthetic rubber, plastics, organic and heavy chemicals, pharmaceuticals, solvents and explosives, petroleum products, etc. Also employed in heat exchangers, mixing tanks, metal cleaning and pickling equipment and process piping and so on

In order to export our EN 1.4898 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of 1.4898 bars 1.4898 round bars, EN 1.4898 rods,that you need, we are glad to quote the best price for you

Except 1.4898 bars,we also could produce 1.4898 flanges,1.4898 plates,1.4898 fastener,1.4898 bolts,1.4898 fittings,1.4898 pipes,1.4898 tubes,1.4898 springs