We could produce 1.4886 bars, EN 1.4886 bars,1.4886 round bars, 1.4886 rods,1.4886 square bars,1.4886 flat bars,1.4886 hot rolled bars, EN 1.4886 cold drawn bright bars,EN 1.4886 forged bars, 1.4886 forging bars,1.4886 Hexagon Bar,1.4886 rectangular bars from china.

We could produce 1.4886 bars with diamter from from 5MM to 1000MM and length up to 15 metres

1.4886 is an austenitic alloy with good high-temperature strength and corrosion resistance

The chemical composition of 1.4886 bars is as follows

Limiting Chemical Composition, %

Nickel..........................................................................34.0-37.0

Chromium....................................................................17.0-20.0

Iron...............................................................................Balance*

Carbon........................................................................0.08max.

Silicon..........................................................................0.75-1.50

Manganese...................................................................2.0 max.

Phosphorus..............................................................0.030 max.

Sulfur ........................................................................0.030max.

The mechanical property of EN 1.4886 bars is as follows

Properties	Metric	Imperial
Tensile  strength(annealed)	600 MPa	87 ksi
Yield  strength(annealed)	280 MPa	40.6 ksi
Elongation  at Break	45%	45%

We could produce 1.4886 bars as per the standard of ASTM B462 and ASTM B473

In order to improve the quality of 1.4886 bars,we could use VIM (Vacuum Induction Melting),ESR (Electroslag Remelting)and VAR (Vacuum Arc Remelting) to melt the material of 1.4886 bar

As per heat treatment of 1.4886 bars, we could do annealed treatment,or solution treatment,ageing treatment as per the requirement of the clients

We could do 100% ultrasonic test according to EN102768-3, SA388,,ASTM A520-1974, Sep 1921 C/c etc as per the requirement of the clients

We also could do 100%  Liquid Penetrant Examination as per the ASTM E165-1995 and 100% Magnetic Particle Examination as per the standard of A275/A275M and so on

We could supply 1.4886 round bars certificate as per the standard of EN10204-3.1 or EN10204-3.2(By third party,like LR,BV,RINA,ABS,DNV,GL,NK,KR and so on)

In order to control the quality of EN 1.4886 bars, We will do following inspections:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients

As per surface finish of 1.4886 bars, we could supply them in the form of black surface, rough machined to bright surface or polish into bright surface,or peeled into bright surface

Our 1.4886 bars are widely used in Quarry & Opencast Mine Maintenance ,Mining & Excavation Plant Equipment ,Deep Mining Pit Maintenance & Repair ,Conveyor Equipment Manufacturers .Mine Construction & Site Extension Construction Impact, Jaw & Cone Crusher Manufacturers,Drilling, Scalping & Screener Equipment Manufacturers and so on

In order to export our EN 1.4886 bars, We will do proper packing in sturdy wooden boxes, material sealed in plastic foil, to avoid any damage during transport.

Please tell us the size and quantity of 1.4886 bars 1.4886 round bars, EN 1.4886 rods,that you need, we are glad to quote the best price for you

Except 1.4886 bars,we also could produce 1.4886 flanges,1.4886 plates,1.4886 fastener,1.4886 bolts,1.4886 fittings,1.4886 pipes,1.4886 tubes,1.4886 springs